Rust in stainless steel and high-temperature alloy steel processing application. During roughing, the choice of 3% to 5% of the emulsion or 10% to 15% of the extreme pressure emulsion, extreme pressure cutting oil and curing oil. When finishing rust, use extreme pressure cutting oil or 10% to 20% of the extreme pressure emulsion, oil curing, curing oil 80% ~ 85% + CCl4 15% ~ 20%, 78% mineral oil to 80% + black oil or rust and lard 18% + 1.7% sulfur, machine oil 90% + CCl4 10%, kerosene 50% + 25% + oleic vegetable oil 25%. Broaching, tapping and reaming, with 15% to 20% of rust or extreme pressure cutting oil, soybean oil or vegetable oil sulfide; add oil in the curing power outlet CCl4 10% ~ 20%, adding 20 in lard % ~ 30% CCl4, and 10% to 15% of kerosene used in sulfurized oil reaming. Sulfurized oil was added in 1.5% ~ 20% CCl4 or mechanical self lead oil plus oil, chlorinated paraffin or diluted with kerosene, or MoS2 ointment for tapping. When hobbing and slotting should be 20% to 25% using extreme pressure cutting oil emulsion or extreme pressure. When drilling aluminum rust inhibitor, with 10% to 15% of an emulsion or a 10% to 15% of a rust inhibitor, extreme pressure cutting oils. High-temperature alloys. In addition to the use of cutting fluid with an outer stainless steel, roughing, with potassium nitrite, potassium 2% + 1% + 7% + triethanolamine 7% to 10% glycerol + water balance or sebacic acid 7% ~ 10 % + 5% + sodium nitrite triethanolamine 7% to 10% + 7% rust inhibitor to 10% + 7% to 10% glycerol + water balance. For nickel-based superalloy, you should avoid using sulfur cutting fluid to avoid stress corrosion steel rust, so that part of the fatigue strength. Features water-based rust inhibitor: 1 with excellent rust resistance. 2 easy to use, can be soaked operation. Three pairs of black or non-ferrous metals are excellent choices, especially cast iron parts, parts of the surface will not stain. 4 completely water-soluble, non-toxic, odorless, nonflammable copper rust, safe and reliable. 5 low cost alternative to anti-rust oil. 6 beautiful piece, leaving no trace, does not affect accuracy. Water-based rust inhibitor currently used boron amine and carboxylic acid amines, boron products both extreme pressure wear, rust and cheap factory, Xie Gang rust, Dongguan City blessing by Ferrer trade Swiss Trade Limited. Trade Co., Ltd. of Dongguan City Ferrer (www.furui-china.com) strong, credible, in Dongguan, Guangdong industrial cleaning agent industry has accumulated a large number of loyal customers. The company better work attitude and continuous improvement of Dongguan Ferrer innovative ideas will lead to trade and you hand into the brilliant, for a better future!