1, boiler water softener main ingredients for caustic soda, latex mold release agents, soda ash, when not directly touch the use, release, and to prevent splashing into eyes. 2, soft water depending on the amount of non-carbonate water hardness, therefore, need to regularly check water hardness in order to adjust the dose, generally used as follows: water PH value of the total amount of soft water hardness (g / ton of water) 6.0 about 65 to 7.0 1.5 to 2.0 0.5 to 1.5 757 50 to 607 0.0 to 0.5 502, with class size should be based on the boiler water, once weighed quantitative water softener, after a small amount of warm water to melt, pour pool ( tank) with dosing timing or injection boiler, so that a uniform and timely. ★ Note: 3, the product of powdered solid, using plastic bags. Cartons (built 10 bags), in transport, storage process should pay attention to stacking in order to avoid moisture caking, if agglomeration best crack, does not affect the results. 4, we must do a good job of sewage, so that a reasonable sewage, to prevent dirt sedimentation, to the original thick boiler scale, mold release agents, wholesale, after initial use of the soft water, preferably in the month shutdown open hand hole, complete Clear rinse, so as not to fall off the old scale buildup. Solid alkalizing descaling operation method to use: 1. Pharmacy amount of 0.5% to 2.0% of the total amount of water, a bucket 10 kg pharmaceutical least 500 liters water capacity can be used for equipment cleaning. 2, caustic temperature: boiler, also known as caustic alkali cooking stove, will be written after the drug is dissolved in the boiler, the boiler is heated to above 80 ℃, adhere to a high temperature 24 hours to 48 hours at a pressure of furnace pressure of 3/4. (Exothermic agent when dissolved in water, liquid temperature will rise, must be worn when using alkali-resistant gloves, masks, to prevent the collapse splash.) 3, after the completion of cooking stoves, oil release agent, open investigation hole, The drop has been loose dirt residue sorted out. (If the scale thickness less than 5mm will become pulpy, more than 5mm will become lumpy or mashed.) 4, finishing is completed, to discharge the remaining liquid, add water erosion repeat. Note: 1, to avoid direct touch with your eyes! Once the touch immediately with a lot of water erosion, no delay; manual operation should wear protective gloves, glasses and anti-alkali. Efficient mold release agents, mold release agents, Dongguan Ferrer trade provided by the Dongguan City Ferrer Trading Limited. Trade Co., Ltd. of Dongguan City Ferrer (www.furui-china.com) strong, credible, in Dongguan, Guangdong industrial cleaning agent industry has accumulated a large number of loyal customers. The company better work attitude and constantly improving innovative ideas will lead Dongguan Ferrer trade into the brilliant and you work for a better future!